SpaceX Starship page

FAQ

  1. When (first) orbital flight? First integrated flight test occurred April 20, 2023. “The vehicle cleared the pad and beach as Starship climbed to an apogee of ~39 km over the Gulf of Mexico – the highest of any Starship to-date. The vehicle experienced multiple engines out during the flight test, lost altitude, and began to tumble. The flight termination system was commanded on both the booster and ship.”
  2. Where can I find streams of the launch? SpaceX Full Livestream. NASASpaceFlight Channel. Lab Padre Channel. Everyday Astronaut Channel.
  3. What’s happening next? SpaceX has assessed damage to Stage 0 and is implementing fixes and changes including a water deluge/pad protection/“shower head” system. No major repairs to key structures appear to be necessary.
  4. When is the next flight test? Just after flight, Elon stated they “Learned a lot for next test launch in a few months.” On April 29, he reiterated this estimate in a Twitter Spaces Q&A (summarized here), saying “I’m glad to report that the pad damage is actually quite small,” should “be repaired quickly,” and “From a pad standpoint, we are probably ready to launch in 6 to 8 weeks.” Requalifying the flight termination system (FTS) and the FAA post-incident review will likely require the longest time to complete. Musk reiterated the timeline on May 26, stating “Major launchpad upgrades should be complete in about a month, then another month of rocket testing on pad, then flight 2 of Starship.”
  5. Why no flame diverter/flame trench below the OLM? Musk tweeted on April 21: “3 months ago, we started building a massive water-cooled, steel plate to go under the launch mount. Wasn’t ready in time & we wrongly thought, based on static fire data, that Fondag would make it through 1 launch.” Regarding a trench, note that the Starship on the OLM sits 2.5x higher off the ground than the Saturn V sat above the base of its flame trench, and the OLM has 6 exits vs. 2 on the Saturn V trench.


Quick Links

RAPTOR ROOST | LAB CAM | SAPPHIRE CAM | SENTINEL CAM | ROVER CAM | ROVER 2.0 CAM | PLEX CAM | NSF STARBASE

Starship Dev 47 | Starship Dev 46 | Starship Dev 45 | Starship Dev 44

Official Starship Update | r/SpaceX Update Thread


Status

Road Closures

Type Start (UTC) End (UTC) Status
Primary 2023-08-24 13:00:00 2023-08-25 01:00:00 Cancelled
Alternative 2023-08-25 14:00:00 2023-08-26 02:00:00 Concluded
Alternative 2023-08-28 13:00:00 2023-08-27 01:00:00 Cancelled

Up to date as of 2023-09-05

Vehicle Status

As of 2023-09-05

Follow Ring Watchers on Twitter and Discord for more.

Ship Location Status Comment
S20 Rocket Garden Retired
S24 Gulf of Mexico Destroyed Destroyed on during Flight Test 1
S25 Stacked on B9 Spin Prime and Static Fire
S26 Rocket Garden Cryo tested
S27 Rocket Garden Scrapped Common dome imploded
S28 Engine Install Stand Raptors installed Previously tested at Masseys
S29 High Bay Under construction Flap installation in progress
S30 High Bay Under construction
S31 High Bay Under construction
S32 Build Site Parts spotted
S33 Build Site Parts spotted
S34 Build Site Parts spotted

 

Booster Location Status Comment
Pre-B7 & B8 Scrapped or Retired B4 is in the Rocket Garden, the rest are scrapped.
B7 Gulf of Mexico Destroyed Destroyed April 20th in Flight Test 1
B9 Launch mount Hot-stage ring installed Static fire (August 5th)
B10 Megabay 1 Cryo tested
B11 Rocket Garden Resting
B12 Megabay 1 Grid fins installed
B13 Build Site Parts under construction
B14 Build Site Parts under construction
B15 Build Site Parts under construction

Resources

  • threelonmusketeersOPM
    link
    fedilink
    English
    9
    edit-2
    1 year ago

    Static fire!

    Edit: Full duration (~6 seconds), targeted 50% thrust. Exact number of engines to be confirmed.

  • @pigeonberry@lemmy.world
    link
    fedilink
    English
    91 year ago

    “SpaceX Files its Starship Mishap Report to the FAA” by Jack Kuhr at Payload.

    SpaceX has filed a final mishap investigation report to the FAA for its April 20 Starship integrated flight test, the FAA told Payload on Tuesday. …

    SpaceX delayed submitting the final report for months while it implemented significant changes to both the launch vehicle and pad…

    The changes mostly being the booster bidet, but there’s also the Flight Termination System (FTS).

    The FAA did not provide a specific timeline for its review process, leaving the timeframe for potential approval up in the air. SpaceX will need the go-ahead from the FAA before it launches again.

    • @burble@lemmy.dbzer0.com
      link
      fedilink
      English
      11 year ago

      I’m looking forward to some journalist FOIAing this report so we don’t have to keep guessing about what’s in it.

    • @pigeonberry@lemmy.world
      link
      fedilink
      English
      2
      edit-2
      1 year ago

      Links to the individual images (I’ve heard that, at one point, people couldn’t see tweets without logging into to Txixxer but could see images):

      Image 1

      Image 2

      Note that there’s someone taking a break on top of the dome in image 2.

  • @pigeonberry@lemmy.world
    link
    fedilink
    English
    71 year ago

    According to a SpaceX label, it’s for Human Landing System, presumably a mockup or test article.

    Chris Bergin - NSF @NASASpaceflight 4:20 PM · Aug 12, 2023, “Mary ( @BocaChicaGal) took some cool shots of the Ship 22 nosecone that went on a wander today. Human-sized door on its side!”

    Image 1Image 2Image 3

    Jack Beyer @thejackbeyer 5:05 PM · Aug 12, 2023, “The former S22 nosecone with a door that was rolled out today has an electrical box that says “HLS” on it… neat. @NASASpaceflight”

    Image 1Image 2Image 3

    TheSpaceEngineer @mcrs987 5:48 PM · Aug 12, 2023, “This is what we currently believe the interior of the Ship 22 crew cabin article looks like. -lol in the time it took to make this infographic it has now been confirmed to be HLS related”

    Image

  • @LettuceTurnipTheBeet@lemm.ee
    link
    fedilink
    English
    6
    edit-2
    1 year ago

    New comment from /u/santacfan on Reddit:

    Starbase Live-

    9:30am- There were workers inspecting the pad shortly after the test and then there was 1 lift at the top of the OLM and 1 lift up at the chopsticks overnight. 1st shift started moving equipment back in when they arrived but they haven’t started any meaningful work as of yet. A lift has also been up at one of S25’s lift points this morning.

    10:10am- I thought the lack of work on the OLM might be a sign that B9 would roll during the early closure but no sign of movement yet

    11:45am- Lifts going up and down to the top of the OLM

    1:07pm- Workers at the SQD

    1:17pm- Side wing with the work platform swings away from the SQD

    3:32pm- Crane returns to the launch pad

    3:51pm- Crane removes a load from the dance floor

    4:10pm- Crane removes a 2nd load of what looks like scaffolding pieces

    4:22pm- 3rd load lifted and crane lowers

    4:31pm- Crane leaves

    5:00pm- Second closure window opens. B9 remains tucked away in the mega bay.

    6:22pm- SPMT’s are still sitting outside of the mega bay. I think we can safely say they aren’t going to get B9 moved in the closure window.

    6:32pm- Water truck filling up the plastic barriers around the mid bay.

    8:00pm- Lifts have been up and down at the OLM. Water truck continues to fill the barriers around the mid bay. SPMT’s still sitting outside the mega bay.

    9:30pm- 2 lifts have been up under the right side of the OLM working (on one of the pipes?)

    10:30pm- Same 2 lifts up. Have moved to the back some

    (This gets synced)

    • @subtle_inquisitor@aussie.zone
      link
      fedilink
      English
      41 year ago

      Surely they’ll fix them up? Or maybe they’re not that confident it will get to reentry anyway. Or even if it does they want to see how damaged tiles behave. Idk, just spitballing here

    • @clothes@lemmy.world
      link
      fedilink
      English
      41 year ago

      This was the first time I’ve watched a spin prime live and I think it must be an acquired taste :P

      Can’t wait for the static fire!

  • @LettuceTurnipTheBeet@lemm.ee
    link
    fedilink
    English
    5
    edit-2
    1 year ago

    New comment from /u/santacfan on Reddit:

    Starbase Live-

    8:45am- Lifts were up at the chopsticks, OLM, and the right rear chine overnight. Workers were also seen on top of the OLM.

    2:04pm- Crane lifts another staircase segment into the new mega bay

    3:47pm- Aerial work platform goes up to the underside of the SQD arm

    6:23pm- Crane arrives near the chopsticks

    6:30pm- Lift goes up to the chopsticks

    7:04pm- 2nd crane arrives. Mini excavator working over by the dog house. (Breaking up fondag?)

    8:05pm- Crane lifts the hydraulic arm, that operates the booster alignment pin on the right side, off of the OLM

    9:15pm- Crane lifts the left side alignment pin unit off

    (This gets synced)

  • @LettuceTurnipTheBeet@lemm.ee
    link
    fedilink
    English
    5
    edit-2
    1 year ago

    New comment from /u/santacfan on Reddit:

    Starbase live-

    8:00am- You’ll never believe it but work continued on the staircase and top of the OLM overnight. The crane never extended and no lifts went up to the chopsticks.

    8:26am- Concrete pump truck up over on the backside of the deluge tank farm

    8:51am- Lift up at the back side of the chopsticks carriage

    9:05am- There are 4 lifts up at the staircase. They are really pushing to finish the welding

    10:43am- B10 on the move down Remidos

    11:53am- B10 turns on to hwy 4

    12:07pm- B10 turns into the production site

    12:18pm- Turns into the megabay

    1:21pm- Crane leaves OLM area

    1:35pm- Concrete truck arrives to start pouring at edge of pad (5 trucks yesterday so this is number 6)

    3:56pm- Small concrete mixer under the OLM. Looks like they are repouring the fondag that was removed

    5:45pm- Forklift has brought in 4 pieces of metal trough(think house gutters) and placed them in the area where the concrete was poured the last 2 days.

    7:21pm- Pad appears to be clear and the pope stack just started venting. Testing something tonight? BQD hood is still open right now

    7:32:12pm- Purge vent from the deluge tank farm

    7:49pm- Pope stack stops

    8:12pm- (20:12) Rover 2 - Security at the entrance to the pad leaves. So pad should be back open.

    8:16pm- Or maybe not. Pope stack starts back up

    8:18pm- Recondenser vent going

    8:25:25pm- More loud venting (from recondenser?)

    8:57:26pm- Vent finally dies out/recondenser stops

    8:58pm- Pope stack starts again

    9:20pm- Fireworks

    9:40pm- Half of tent 2 goes down

    10:39pm- Workers return to the OLM and get right back to work on the staircase.

    (This gets synced)