Seems like it might be time to build my next router before they become unaffordable. I’ve done some research, but I’d like to get the pulse of the community since other self-hosters may have a similar use care.
Should I use PFsense or OpenWRT? Should I use purpose built or minipc hardware?
This is for a home network (symmetric gigabit fiber). A few of the devices have 2.5LAN ports and it would be nice to make use of that speed locally. Primary uses include streaming Disney+ and YouTube, web browsing, and self-hosting a few services I connect to via wireguard. Sometimes I play games, but not competitively, so an extra ms of ping isn’t going to throw me into a rage. I do use a remote desktop feature like steam link to play gamed on my home office PC from my bedroom. Ping is currently acceptable according to the system with occasional slowdowns when my family is slamming the WiFi.
I will need to provide WiFi access. If my existing router(s) have an AP mode, I imagine I can just plug them in via ethernet?
What kind of wireless AP hardware do I need if I want connections to transfer between a basement and attic AP with minimal interruption?
For the router itself, I see people using what look like barebones routers and others using a minipc with dual LAN. What do you use and what advantages/disadvantages have you experienced as a result.
Can I set up a wireguard VPN server in either pfSense or OpenWRT?
Are there any enshittification risks or open-source purity concerns with either choice?
Is there a significant difference in popularity between pfsense and openwrt?
I will happily accept hardware recommendations for 2.5GB capable router hardware for a home network with 1GB fiber. It needs to be able to handle inbound and outbound wireguard connections. I’m overwhelmed by the many options between all the minipcs and purpose built hardware. Location is USA.
I appreciate any insight you may have. I’m a Linux guy, but networking has always been my weak point so I’m asking for help.
I’ve been running opnsense on a qotom mini pc for a couple years now and have no complaints. It has plenty of resources for my 1gb fiber connection.
Are you currently using a modem/router combo or are they separate units? If it’s one unit, you’ll need a way to connect your fiber. The qotom has 4 sfp ports that should work for this or you can use a media converter.
The qotom has 5 2.5gb ethernet ports so you might be able to avoid adding on a switch. If you go the route of using a mini pc with dual ethernet, you’ll have to add a switch to the mix.
I have the fiber ONT straight from the wall. The tech support guys at my ISP gave me all the details I needed to configure my own current router (GLInet Flint 2). I’ve just been not trusting corporate solutions lately. I’m almost completely degoogled on my phone and the recent router banning drama is encouraging me to do this now instead of later when I had originally wanted to do it.