Hi selfhosters,

I’m considering improving the security of my homelab/server setup and I’d love to hear some more experienced opinions on my plans.

Like most self-hosters, I started out with a single-server setup: I cobbled together some old hardware, slapped on a NAS-style OS, bolted on Docker and started experimenting. As things go, my setup has grown a lot over the years. I’m running a lot on that machine - NAS capability, local DNS via pihole, a Wireguard VPN endpoint (so I can tunnel into the LAN from outside), many private services (accessible only from inside the LAN), but also some public ones accessible from the open web.

Although I’ve tried to do my homework in terms of security (various hardening measures for SSH and Docker, reverse proxy, proper SSL termination for everything), I realise I’ve put a lot of eggs in that one basket and I might want to introduce some network segmentation.

I don’t think I’m ready for getting a hardware firewall or a router/switch capable of VLANs just yet. What I’m considering, though, is putting my services available from the open internet on a separate server inside my network - a little Pi 5 I’ve still got lying around. My idea is that if a container on that is breached and if an attacker manages to escape the container to gain root access, compromise would be limited to the few of publicly available services I have on the Pi, thus limiting blast radius. If combined with (software) firewall rules that make the Pi a ‘pariah node’ (dropping all incoming connection efforts), lateral movement to other devices on the network could be contained.

An alternative would be to finally make the move to Proxmox. Everything would still be running on one physical machine, but I’d create several VMs: there would be one for private, one for publicly available services, and I’d firewall the latter off rigorously so it cannot connect to anything else.

I’d like your opinion on these plans. Which one would you recommend? Are they both sound, or is there anything I haven’t considered? Are there other (easy, non-hardware intense) things I could do to improve security even more?

  • LewdLemon@sh.itjust.worksOPEnglish
    1·
    4 hours ago

    Thanks for your detailed reply and expertise! I really appreciate it!

    First question you have to ask yourself is so what?

    You’re right to call out my lack of threat modeling. I am aware that the “cost” of what I’m planning here likely outweighs the actual risks. That’s a deliberate choice though: one of my objectives in homelabbing is to “learn how the big guys do it”, i.e. learning and implementing, bit by bit, networking and security best practices.

    That said,

    • all of my drives are (LUKS) encrypted (although this will only help against evil maid attacks physically stealing my disks, since data is only encrypted at rest, not while the server is in operation)
    • I do have some CPU monitoring in place
    • I have applied the principle of least privilege (as far as I can see at least)
    • I have set up an off-site backup server running (although I need to improve automation and deduplication; I’ll probably go with Borg here)

    Thank you also for pointing me towards OWASP Docker cheat sheet! I didn’t know this resource yet, although I seem to have found others that said the same thing. I already have in place:

    • no docker socket exposed to services
    • user set for every service that didn’t give me a headache doing that (some assume root and won’t accept setting a user)
    • username remapping is active
    • all containers have their caps dropped and selectively only put those back in which they need
    • I expose almost no container ports, and only those necessary; instead, communication with the containers is handled on my reverse proxy’s network (i.e. via the internal docker network)
    • privilege escalation is disabled

    I have played around with rootless docker (again, stubborn containers assuming root prevented me from going all-in) and considered Podman, although just putting containers in a VM looks like a more frictionless route to me.

    All things considered, your advice seems to be:

    1. to first consider whether I actually need all this security. I really don’t, yet I want to learn how to set it up anyway.
    2. to first explore and all other hardening avenues. I have, to a certain degree, and beyond that run into brick walls.

    If I might exhaust a little more of your time, I’d be curious how you judge the next step I’ve suggested: splitting duties between separate servers, thus segmenting public from private physically, or going the virtual route (again, by splitting into a public and a private VM and separate them through strict software firewalling).